Skip to content
VAS Car Care

VAS Shiny Stuff

Liquid Glass Coating

Self-levelling liquid glass coating. Extreme gloss and up to 2 years of protection.

235ml (8oz) aluminium bottle

Liquid Glass Coating · 235ml kit

Deliver to

Secure payment by Stripe. Card details never touch this website.

Woman holding a bottle of VAS Shiny Stuff Liquid Glass Coating in front of a glossy black car

See it in action

Watch the mirror-like glass finish on real paintwork, and see how it hides light scratches.

The glass finish
Covering scratches

Why drivers love it

  • 01

    Extreme high-gloss finish

  • 02

    Superior self-cleaning, hydrophobic surface

  • 03

    Restores faded or oxidised paint

  • 04

    Fills and conceals sun spots and micro-scratches

  • 05

    Blocks UV-induced paint degradation

  • 06

    Long-lasting protection for up to 2 years

How to use

Liquid Glass is a self-levelling protective coating formulated with premium-grade polyester and PTFE (Teflon). It delivers exceptional gloss, hardness, chemical resistance and self-cleaning properties. Its hydrophobic surface reduces dust adhesion and masks light swirl marks and fine scratches.

Apply indoors only. Wear the gloves and a mask. For best results, polish the vehicle before applying.

  1. 1

    Thoroughly clean the paint with a pH-neutral car shampoo.

  2. 2

    Use an IPA-based degreaser to remove all wax, oils and residues from the painted surface.

  3. 3

    Saturate the round applicator sponge, then apply evenly to the paint. Reapply to any missed spots.

  4. 4

    The coating starts to cure and stops self-levelling about 10 minutes after application.

  5. 5

    If streaks or fisheyes appear, wipe off immediately with degreaser. After 30 minutes, removal needs machine polishing.

What's in the box

VAS Shiny Stuff kit in its box: 235ml bottle, applicator sponge, protection gloves, dripping cap and instructions
  • ✦235ml liquid bottle
  • ✦Applicator sponge
  • ✦Protection gloves
  • ✦Instructions
  • ✦Dripping cap
Coverage
235ml — one full-size saloon or SUV
Suitable for
OEM and refinished paint (not vinyl wraps, PPF, glass, headlights, plastic trim or carbon fibre)
Hardness
>6H pencil hardness
Film thickness
5–6 microns
Water contact angle
88–92°
Temperature resistance
-30°C to +150°C
Curing
Surface dry in ~1 hour, full cure in 3–5 days
Ideal conditions
15–30°C, low humidity, indoors and wind-free
Shelf life
3 years unopened

Good to know

Not recommended for humid or high-temperature conditions. Do not wash or touch the paint for at least 4 days (summer) or 6 days (winter) after application. Not suitable for vinyl wraps, PPF, glass, plastic, headlights or carbon fibre. Deep defects need polishing first.

Can I apply it myself? How long does it last?
Yes — it is designed for DIY use in a garage and gives up to 2 years of protection when applied correctly.
When can I wash my car after application?
Wait 4 days in summer or 6 days in winter before hand or automatic washing.
How long does application take?
A full car usually takes under 2 hours. After 1 hour it can go in sunlight to speed up curing, but keep it indoors overnight to avoid dew.
Is polishing required first?
Not always. It fills minor swirls and sun spots. Only deep defects need polishing first.
Does it need special maintenance?
No. The self-cleaning surface repels dirt — regular washing is enough.
Can I put wax or sealant over it?
Yes — after 30 days you can apply carnauba wax or a synthetic sealant for extra depth.
What causes streaks?
Usually too little product in one spot. Reapply within 2–3 minutes and it will self-level.
Why do white spots or haze appear?
Moisture (rain, humidity, dew) before full cure. Wipe with degreaser straight away; if it persists, machine polish.